Technical Specifications:
| Input voltage | 220VAC |
| Input frequency | 50Hz |
| Input phase | Single phase |
| Input socket | With Fuse |
| Cold Start (0 to 100% load) | Press the ON/OFF switch |
| Input range (220V) | 140V-300V |
| Rating output (VA). | 650VA |
| Rating output (W). | 390W |
| Rating output (W). | Battery mode(simulated sine wave), AC mode (sine wave) |
| Power factor | 0.6 |
| Rating voltage | 220V |
| Output range | 220Vac-7%+15% ( in battary mode ) |
| Rear Output Socket | 2xUniversal - Battery backup |
| Transfer time | TYPICAL 4-8 ms |
| Communication Interface | NIL |
| Rating frequency | 50Hz |
| Output Frequency Line-mode | Synchronize with the Utility |
| Battery mode | 50 Hz±1Hz |
| Output Frequency Line Mode | Synchronize with the utility |
| Short Circuit Protection Line Mode | FUSE & firmware protection |
| Warranty | 1 year warranty |
| Rating frequency | 12V/8.2AH x 1 |
| Backup Tim - Typical | 10mins to 18mins (depending on load) |
| Charge Current | About 1A at normal mode |
| Over Charge Protection | >14.5V +/- 0.2V stop charging |
| Dimension (W X D X H) | |
| Dimension | Weight 5.6kg +/- 0.3Kg Dimension 390x 145 x 220 (mm) Master Carton 45.5 x 40 x 23.5 (cm) |
| Hardware | |
| Battery Capacity | Battery Mode Software protection controlled by firmware Overload Protection Line Mode 110%+-5% (Go to fault mode after 5 minutes), 120%+-5% (Go to fault mode immediately) Battery Mode 110%+-5% (Shutdown after 5 minutes) 120%+-5% (Shut down immediately) |
