APC Smart-UPS RT 15KVA 230V UPS
Product Specification
 
Ensure reliable power is delivered to you equipment at all times with the APC Smart-UPS RT 15KVA 230V UPS. It can be installed with single or three-phase input wiring, and connected to two separate power sources for increased availability. It features ten output connectors and an average battery run time of up to 8.3 minutes.

The PSU provides power when utility power is not available, and the automatic internal bypass supplies utility power to connected loads in the event of UPS overload or fault. Equipment is automatically restarted when power returns, and the PSU gives a warning when a battery is unavailable to provide backup power. Clean, uninterrupted power is provided while batteries are being replaced.

The power supply unit allows you monitor the health status and expected run time of external batteries. The LCD display shows system parameters and alarms for easy management. The removable input/output wiring tray allows for quick and easy installation and maintenance, while FTP can be used for installing firmware remotely.

The UPS regulates charge voltage according to the battery’s temperature in order to prolong the battery life. Battery life, performance and reliability can be maximised through intelligent, precision charging. The power supply also protects your equipment from power surges, spikes and lightning, and is an ideal way to safeguard your devices and give yourself peace of mind.

Features
  • Dual mains input Increases availability by allowing the UPS to be connected to two separate power sources.
  • LCD display Alpha-Numeric Display which displays system parameters and alarms.
  • Manageable external batteries Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime.
  • Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
  • Removable input/output wiring tray Allows quick and easy installation and maintenance of the UPS.
  • Single or three-phase input wireable Provides flexibility for the UPS to be installed using either single or three-phase input wiring.


 
Product Specification
Output
Output Power Capacity12 kW / 15 kVA
Max Configurable Power12 kW / 15 kVA
Nominal Output Voltage230V
Output Voltage NoteConfigurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Output Voltage DistortionLess than 5%
Output Frequency (sync to mains)50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages220, 240
Crest Factor03:01
TopologyDouble Conversion Online
Waveform TypeSine wave
Output Connections(1) Hard Wire 3-wire (H N + G)
 (1) Hard Wire 5-wire (3PH + N + G)
 (8) IEC 320 C19
 (2) IEC Jumpers
Overload Operation60 seconds @ 125% and 30 seconds @ 150%
BypassBuilt-in Static Bypass, Internal Bypass (Automatic and Manual), Optional External Bypass
Input
Nominal Input Voltage230V, 400V 3PH
Input Frequency40 - 70 Hz (auto sensing)
Input ConnectionsHard Wire 3 wire (1PH+N+G)
 Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations160 - 280V
Other Input Voltages220, 240
Maximum Input Current90A
Input Breaker Capacity100  A
Input Total Harmonic DistortionLess than 5% for full load
Batteries & Runtime
Battery TypeMaintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules4
Typical recharge time2.50 hour(s)
Interface Port(s)DB-9 RS-232, RJ-45 10/100 Base-T, Smart-Slot
Emergency Power Off (EPO)Yes
Physical
Maximum Height533.00 mm
Maximum Width432.00 mm
Maximum Depth773.00 mm
Rack Height12U
Net Weight247.73 KG
ColorBlack
Operating Environment0 - 40 °C
Standard Warranty2 years

Write a review

Note: HTML is not translated!
    Bad           Good

APC Smart-UPS RT 15KVA 230V UPS

  • Views: 643
  • Product Code: SURT15KRMXLI
  • Availability: In Stock
0 Product(s) Sold
  • ₦3,920,000

Tags: 15KVA, 230V, APC, RT, Smart-UPS, UPS