Buy D-Link 48 ports 10/100BASE-T + 2 combo 1000BASE-T/ SFP Switches Online - PCPlanet
D-Link 48 ports 10/100BASE-T + 2 combo 1000BASE-T/ SFP Switches
Product Overview
The DES-3200 switches is a line of managed switches D-Link 2-level, intended for networks Metro Ethernet (ETTX and FTTX) and corporate networks. Switches in this series are equipped with 8/16/24/48 port 10/100 Mbit / s Fast Ethernet, as well as combo port 1/2/4 Gigabit Ethernet / SFP. Switches DES-3200-10 / 18 made in the body width of 9.11 inches and are equipped with a passive cooling system, suitable for desktop use and for use in telecommunications and cabinets. Switches DES-3200-26,28,28 / ME, 28F, 52 1U height designed for installation in 19-inch rack and provides a connection to copper or optics (24/48 port) at a speed of 100 Mbit / c. All devices have a series of practical design with 1, 2 or 4 combo ports of Gigabit Ethernet / SFP, which provide bandwidth of up to 4 Gb / s and allow to use these switches in a ring topology. Switch DES-3200-28 / ME is made specifically for use in telecommunication closets, where operators and engineers have access only to the front of the device and need quick troubleshooting. All interfaces are located on the front of the DES-3200-28 / ME, including the connector for the power cable that meets the requirements of large networks. In addition, the switch DES-3200-28 / ME is equipped with a connector "dry contacts" for event detection and alarm. DES-3200-28F is the ideal solution for network deployment FTTX, allowing you to bring fiber optic line directly to the subscriber unit. Through the use of a switch DES-3200-28F fiber-optic communication lines to connect subscribers significantly increased transmission distance (up to 20 km) and excludes the impact of crosstalk inherent in copper. Switches DES-3200-28P / 52P meet the standards of PoE (Power over Ethernet-cable) IEEE 802.3af and IEEE 802.3at and provide power up to 15.4 watts per port and up to 30 watts on the first four / eight ports. Supports PoE / PoE + devices such as video / IP-phones, wireless access points and IP-cameras, lets you apply power to them directly from the switch to Ethernet-cable, which greatly simplifies network deployment. All switches DES-3200 series are equipped with 2 or 4 Gigabit ports SFP, which provides the ability to select the type of network topology, "ring", "tree" or mixed type.
 
Safety and reliability
Switches DES-3200 series supports access control based on 802.1x port / host, the ability to create a guest VLAN, and authentication and RADIUS / TACACS / XTACACS / TACACS + when connected to a switch. Function IP-MAC-Port Binding allows administrators to bind IP-address and MAC address of the user to a specific port number on the switch, thereby prohibiting the user to change the network settings. Moreover, thanks to the DHCP Snooping, the switch automatically detects pairs of IP / MAC-addresses issued by the server, DHCP-tracking packages and storing them in a "white list" IMPB. These features play a significant role in the support of network security. Built-in D-Link Safeguard Engine provides identification and prioritization of packets to be processed directly by the CPU switch to prevent malicious attacks and counteract the effects of parasitic traffic on the CPU switch. In addition, DES-3200 supports the list contains a complete access control (ACL). This functionality allows administrators to restrict access to network services and does not affect the performance of the switch.
 
Resilience / performance
Switches DES-3200 series supports the Protocol 802.1D-2004 edition, 802.1w and 802.1s Multiple Spanning Tree (MSTP). STP allows you to organize backup route data used in the event of any failed switch on the main route of the network traffic. The switches also support link aggregation, standards-based 802.3ad (LACP) and 802.1AX, allowing you to group multiple ports, increasing the bandwidth and increasing fault tolerance connections between network devices. The switches support 802.1p for Quality of Service (QoS). In addition, the traffic can be prioritized on the basis of marks TOS, DSCP, MAC-addresses or IP-address of the client, Vlan number, port number, TCP / UDP, protocol type, or based on the contents of packets specified by the user. This functionality is especially important in the provision of IPTV. Also DES-3200 series supports functional Voice VLAN, is a separate vlan, which is automatically placed in voice traffic, with a view to its subsequent processing with a higher priority level than the rest of the traffic.
 
Traffic Control and Bandwidth
With Bandwidth Control allows network administrators to define bandwidth for each port increments up to 8 kbit / s for incoming and outgoing traffic. The switches also support the functional protection from the storm (Storm Control), which allows you to get rid of unnecessary broadcast / multicast traffic. Port Mirroring facilitate traffic diagnostics and helps administrators to monitor network performance. Switches DES-3200 series supports markers "two-speed, three-colored marking" and "One speed, three color labeling" (trTCM / srTCM), allowing due to the decomposition of flows on the priorities to ensure maximum throughput of important traffic.
 
Multicasting
Switches DES-3200 series supports a complete set of functions for working with L2 multicast, including IGMP Snooping, IGMP filtering, Fast Leave. Thanks to the support of the functional switch DES-3200 provides an opportunity to work with IPTV-services, enjoys a growing demand in the market.
 
IGMP / MLD Snooping provides host-based connection of multiple customer multicast group to one network interface. When using the ISM VLAN multicast traffic for the purpose of efficient spending bandwidth transmitted in a separate Vlan. ISM VLAN profiles allow users to quickly and easily assign / change the preset settings on ports multicast subscribers.
 
OAM
Switches DES-3200 series support the diagnosis cable to check the status of network cables and identify the cause of malfunction of the cable. Function 802.1ag Connectivity Fault Management (CFM) provides tools for surveillance, as well as for troubleshooting in complex and Ethernet-enabling service providers to perform the connection test and quickly locate network problems, identify the user faced with these problems. Functions 802.3ah Ethernet OAM, Dying Gasp and D-Link Unidirectional Link Detection (DULD) can improve network manageability and increase stability of the compound, as well as to detect the fault.
 
Management functions
Switches DES-3200 series supports standard management protocols such as SNMP, RMON, Telnet, SSH / SSL. The user-friendly web interface for easy management. DHCP automatically is an enhanced management feature that allows administrators to pre-configure the settings and save them to a TFTP-server and automatically apply to the switches in the process of obtaining IP-address from the server that makes network configuration easier and faster. Supported protocols LLDP and LLDP-MED enables detection used in an Ethernet network equipment. In accordance with the result of the search, the administrator can easily apply the settings for device discovery and obtain a graphical representation of the topology using the network management system (NMS).
Function D-Link Single IP Management (SIM) simplifies and improves the efficiency of management tasks, allowing the simultaneous configuration of multiple switches, surveillance and maintenance from any location using a Web-browser. Moreover, the switch DES-3200 series supports software D-View 6.0. D-View 6.0 is a Network Management System that allows you to improve the most important for the network characteristics such as availability, reliability, fault tolerance and security. D-View 6.0 provides network administrators with a set of useful tools for effective configuration management, performance and security, as well as error detection.
 
Support for IPv6
Switches DES-3200 series has successfully passed the certification IPv6 Ready Logo Phase 2, which guarantees the operation of the switch in networks IPv6. In addition, this series supports both protocol stacks IPv4 / v6, allowing switches to act as a bridge between IPv4 and IPv6. With the constant expansion of the network security problem is most acute. To solve it, a series of DES-3200 supports features such as IPv6 ACL, IMPBv6 and L3 Control Packet Filtering, designed to protect against network attacks in IPv6 networks.
 
Product Specification
Interface
48 10/100BASE-TX PoE
2 10/100/1000BASE-T
2 Combo 10/100/1000BASE-T or 100/1000 SFP
PoE SupportYes
PoE Budget370W
PoE PortsJan-48
PoE+ Ports01-Aug
Console PortRJ-45
Performance
Switching Capacity17.6 Gbps
63-Byte Packet Forwarding Rate13.1 Mpps
MAC Address Table-Size16K Entries
SDRAM for CPU128 MB
Packet Buffer1.5MB
Flash Memory32 MB
Jumbo Frame12kb
Physical & Environmental
LEDsPower (Per Device)
Console (Per Device)
Link/Activity/Speed (Per Port)
Acoustic39.3 dB at low speed
51.2 dB at high speed
Heat Dissipation1608.196 BTU per hour
Power Input100 to 240 VAC, 50 to 60 Hz Internal Universal Power Supply
Max Power Consumption471.6 watts
Dimensions17.36” x 12.13” x 1.732” (441 x 308 x 44 mm)
19-inch Standard Rack-Mount Width, 1U Height
VentilationSmart Fans
Power Surge ProtectionAll Ethernet ports support IEC61000-4-5 10/700us 6 KV surge protection
Operating Temperature23°F to 112°F (-5° to 50°C)
Storage Temperature-40°F to 158°F(-40° to 70°C)
Operating Humidity10% to 90% non-condensing
EMIFCC Class A
CE Class A
VCCI Class A
IC
C-Tick
Safety    CE LVD
UL/cUL
CB
3rd Party CertificationsMEF 21, IPv6 Ready Logo
MTBF189,396 hours
Software Features
Stackability Virtual Stacking: D-Link Single IP Management, Up to 32 units per Virtual Stack
L2 Features    MAC Address Table: 8k
Flow Control:
802.3x Flow Control
HoL Blocking Prevention
Loopback Detection
Port Mirroring:
Supports 1 Mirroring group
Supports One-to-One, Many-to-One, Flow-based (ACL) Mirroring
Ethernet Ring Protection Switching (ERPS)
L2 Protocol TunnelingSpanning Tree Protocols
802.1D STP
BPDU Filtering
802.1w RSTP
Root Restriction
802.1s MSTP
802.1Q-2005 MSTP
Link AggregationMax. 14 groups (8 ports per group) Compliant with 802.1AX (formerly 802.3ad)
L2 MulticastingIGMP Snooping:
IGMP v1/v2 Snooping, IGMP v3 awareness
Supports 1K groups
Port/Host-based IGMP Snooping Fast Leave
Limited IP Multicasting:
Up to 24 IGMP filtering profiles, 128 ranges per profile
MLD Snooping:
MLD v1, MLD v2 awareness
Supports 1K groups
IGMP Authentication
VLAN802.1Q Tagged VLAN VLAN Group: Max. 4K VLAN
Port-based VLAN
MAC-based VLAN
GVRP: Max. 255 dynamic VLANs
802.1v Protocol VLAN
VLAN Trunking
Asymmetric VLAN
Double VLAN (Q-in-Q):
Port-based Q-in-Q
Selective Q-in-Q
ISM VLAN
VLAN Translation
L3 FeaturesGratuitous ARP
Quality of Service (QoS)Port-based Bandwidth Control: Ingress/Egress, min. granularity 8kbps)
Flow-based Bandwidth Control:(Ingress, min. granularity 8 kbps))
Per egress queue Bandwidth Control
4 queues per port
DSCP
802.1p
Queue Handling:
Strict Priority
Weighted Round Robin (WRR)
Strict + WRR
Remark 802.1p Priority Tag
Remark ToS/DSCP Tag
Bandwidth Control
Flow Statistics
Time-based QoS
CoS Based on:
Switch Port
VLAN ID
802.1p Priority Queues
MAC Address
Ether Type
IPv4/v6 Address
IPv6 Traffic Class
IPv6 Flow Label
TOS
DSCP
Protocol Type
TCP/UDP Port
User-defined packet content
Access Control List (ACL)ACL based on: Switch Port
VLAN ID
802.1p Priority Queues
MAC Address
Ether Type
IPv4/v6 Address
IPv6 Traffic Class
IPv6 Flow Label
ToS
DSCP
Protocol Type
TCP/UDP Port
User Defined Packet Content
Up to 512 ingress access rules
Time-based ACL
ACL Statistics
CPU Interface Filtering
SecuritySSH v2
SSL v1/v2/v3
Port Security: up to 64 MAC addresses per port
Broadcast/Multicast/Unicast Storm Control
IP-MAC-Port Binding (IMPB):
ARP Inspection
IP Inspection
DHCP Snooping
Traffic Segmentation
D-Link Safeguard Engine
DHCP Server Screening
DHCP Client Filtering
DoS Attack Prevention
ARP Spoofing Prevention
BPDU Attack Protection
AAAGuest VLAN
RADIUS
TACACS+
XTACACS+
Trusted Host
RADIUS Accounting
Two-level User Account
802.1XPort-based Access Control
Host-based Access Control
Dynamic VLAN Assignment
Identity-driven security policy assignment: QOS, VLAN
MAC-based Access Control (MAC)Port-based Access Control Host-based Access Control
Dynamic VLAN Assignment
Authentication Database Failover
Identity-driven security policy assignment: QoS, ACL, VLAN
Microsoft® NAP (IPv4/v6)Supports 802.1x NAP
Supports DHCP NAP
ManagementWeb-based GUI (Supports IPv4/v6) Command Line Interface (CLI)
Telnet Server/Client (Supports IPv4/v6)
TFTP Client (Supports IPv4/v6)
ZModem
SNMP v1/v2c/v3
SNMP Traps
System Log
RMON v1: Supports 1,2,3,9 groups
RMON v2: Supports ProbeConfig group
BootP/DHCP Client
DHCP Auto-Configuration
DHCP Relay
DHCP Relay Option 12
DHCP Relay Option 82
PPPoE Circuit-ID Tag Insertion
Dual Image
CPU Monitoring
SNTP
LLDP
Debug Command
Password Encryption
SMTPPing (Supports IPv4/v6)
Traceroute (Supports IPv4)
Command Logging
ICMPv6
Microsoft® NLB (Network Load Balancing) Support
OAMCable Diagnostics
802.3ah Ethernet Link OAM
Dying Gasp
802.1ag Connectivity Fault Management (CFM)
802.3ah D-Link Extension: D-Link Unidirectional Link Detection (DULD)MIB
RFC 1065, 1066, 1155, 1156, 2578 MIB Structure
RFC 1157, 2571-2576 SNMP MIB
RFC 1212 Concise MIB Definitions
RFC 1213 MIB II

Write a review

Note: HTML is not translated!
    Bad           Good

D-Link 48 ports 10/100BASE-T + 2 combo 1000BASE-T/ SFP Switches

  • Views: 4223
  • Product Code: DES-3200-52/E
  • Availability: In Stock
0 Product(s) Sold
  • ₦105,000

Tags: +, 10/100BASE-T, 1000BASE-T/, 2, 48, D-Link, SFP, Switches, combo, ports