APC Smart-Ups Vt 20kva 400v w/2 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable
Product Overview
Parallel-capacity capable
Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
Parallel-redundant capable
Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy

Smart-UPS VT Features & Benefits

Manageability
LED status indicators
Quickly understand unit and power status with visual indicators.
SmartSlot
Customize UPS capabilities with management cards.
Network manageable
Provides remote power management of the UPS over the network.
LCD display
Alpha-Numeric Display which displays system parameters and alarms.
Infrastruxure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Programmable frequency
Ensures compatibility with different input frequencies.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Serviceability
Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Availability
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
Scalable runtime
Allows additional run time to be quickly added as needed.
Battery modules connected in parallel
Delivers higher availability through redundant batteries.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Total Cost of Ownership
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Protection
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Cold-start capable
Provides temporary battery power when the utility power is out.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Marketing Features
Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.
Scalable runtime
Allows additional run time to be quickly added as needed.
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Network manageable
Provides remote power management of the UPS over the network.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
 
Product Specification
Output
Output power capacity16.0 KWatts / 20.0 kVA
Max Configurable Power (Watts)16.0 KWatts / 20.0 kVA
Nominal Output Voltage400V 3PH
Output Voltage NoteConfigurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Efficiency at Full Load95.30%
Output Voltage DistortionLess than 5% at full load
Output Frequency (sync to mains)47 - 53 Hz for 50 Hz nominal
Output Frequency (not synced)50Hz +/- 0.1% for 50Hz nominal
Other Output Voltages380, 415
Load Crest Factor03:01
TopologyDouble Conversion Online
Waveform typeSine wave
Maximum Output Current32
Output Connections(1) Screw Terminals (Battery Backup)
(1) Hard Wire 4-wire (3PH + G) (Battery Backup)
(1) Hard Wire 5-wire (3PH + N + G) (Battery Backup)
BypassBuilt-in Maintenance Bypass, Built-in Static Bypass
Input
Nominal Input Voltage400V 3PH
Input frequency40 - 70 Hz (auto sensing)
Input ConnectionsHard Wire 5-wire (3PH + N + G)
Input voltage range for main operations304 - 477 V
Efficiency at Full Load95.30%
Other Input Voltages380, 415
Maximum Input Current27.0 A
Input Power Factor at Full Load0.98
Batteries & Runtime
Battery typeVRLA
Included Battery Modules2
Typical recharge time4 hour(s)
Nominal Battery Voltage+/-192 V (split battery referenced to neutral)
Battery Slots Empty2
RBC Quantity2
Extendable Run Time1
Battery Volt-Amp-Hour Capacity4983
Extended Run OptionsAPC-Smart-UPS-VT-20kVA-400V-w-2-Batt-Mod-Exp-to-4-Start-Up-5X8-Int-Maint-Bypass-Parallel-Capable
End of Discharge Battery Voltage+/-154 V
RuntimeView Runtime Graph
 View Runtime Chart
Communications & Management
Interface Port(s)DB-9 RS-232 , Smart-Slot
Pre-Installed SmartSlot™ CardsAP9631
Control panelMulti-function LCD status and control console
Audible AlarmAudible and visible alarms prioritized by severity
Emergency Power Off (EPO)Yes
Physical
Maximum Height1499 , 149.9 cm
Maximum Width559 , 55.9 cm
Maximum Depth813 , 81.3 cm
Net Weight415.0 kg
Shipping weight445.91 kg
Shipping Height1643 , 164.3 cm
Shipping Width650 , 65.0 cm
Shipping Depth1062 , 106.2 cm
ColorBlack
Units per Pallet1
Environmental
Operating Environment0 - 40 °C
Operating Relative Humidity0 - 95 %
Operating Elevation0-999.9 meters
Storage Temperature-50 - 40 °C
Storage Relative Humidity0 - 95 %
Storage Elevation0-15000 meters
Audible noise at 1 meter from surface of unit64.0 dBA
Online thermal dissipation3112.0 BTU/hr
Protection ClassIP 20
Warranty1 Year

Write a review

Note: HTML is not translated!
    Bad           Good

APC Smart-Ups Vt 20kva 400v w/2 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable

  • Views: 1090
  • Product Code: SUVTP20KH4B4S
  • Availability: In Stock
0 Product(s) Sold
  • ₦4,424,000

Tags: 20kVA, 4, 400V, 5X8, APC, Batt, Bypass, Capable, Exp, Int Maint, Mod, Paralle, Smart-UPS, Start-Up, VT, to, w/2